TOA VM-2120 System Amplifiers

Manufacturer

: £759.00 + VAT

Our price:
£607.20 + VAT

That's a 20% discount, saving you £151.80 on every unit!

The VM-2120 is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with 4 audio inputs including the background music input, and the speaker output section which has an internal attenuator and 5-zone selector. It permits not only general-purpose broadcast, but also Emergency Broadcast based on the EN60849 Standard which gives pre-recorded voice instructions (optional EV-200M is required) in the emergency situation. Broadcast can be made from an optional RM-200M Remote Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, for 100 V? application the unit features the surveillance function (optional SV-200MA is required) which automatically checks the system for failures.

Add to Wishlist
Add to Wishlist
SKU: VM-2120 Categories: ,

Product Features

  • Programmable system management amplifier
  • 120 W or 240 W
  • 5 switchable high impedance speaker zones with adjustable attenuators
  • 9 units can be combined to increase the output power and number of zones
  • 4 input channels come with volume and bass/ treble control on the front panel
  • Both BGM inputs with level pre-adjustment
  • The routing to the zones of the 3 microphone/ line level inputs and the telephone paging input can be pre-set
  • Emergency power input, remote power control, 7 built-in chimes etc.

Application Examples

  • Restaurants
  • Bars
  • Hotels
  • Conference rooms
  • Auditoriums
  • Office buildings
  • Museums
  • Health & fitness clubs
  • Theme parks
  • Houses of worship

Specifications

VM-2120VM-2240
Power source

230 V AC, 50 / 60 Hz

230 V AC, 50 / 60 Hz

Rated output

120 W (total into 5 zones)

240 W (total into 5 zones)

Frequency response

50 Hz - 16 kHz

50 Hz - 16 kHz

Distortion

< 1 %

< 1 %

Power consumption

37 W (no output), 201 W (at rated output)

54 W (no output), 549 W (at rated output)

Current consumption

5.2 A

14 A

S/N ratio

60 dB (or more)

60 dB (or more)

Inputs

MIC (-60 dBV) /LINE (-10 dBV), balanced x3

Telephone (-10 dBV, balanced) x1

BGM (-20 dBV, unbalanced, stereo RCA jacks) x2

100V x1

MIC (-60 dBV) /LINE (-10 dBV), balanced x3

Telephone (-10 dBV, balanced) x1

BGM (-20 dBV, unbalanced, stereo RCA jacks) x2

100V x1

Outputs

Speaker lines with attenuator, selectable x5

Direct speaker output x1

Line (0 dBV, unbalanced, RCA jack) x1

Recording (0 dBV, unbalanced, RCA jack) x1

Preamplifier (0 dBV, unbalanced, RCA jack) x1

Speaker lines with attenuator, selectable x5

Direct speaker output x1

Line (0 dBV, unbalanced, RCA jack) x1

Recording (0 dBV, unbalanced, RCA jack) x1

Preamplifier (0 dBV, unbalanced, RCA jack) x1

Control input

Contact input, open voltage: 3.3 VDC, short-circuit current max. 1 mA

activation of inputs 1-3 x3

25-pin female D-sub connector:

? Activation of messages (when EV-200M is installed) x5

? Activation of power

? Activation and stop of emergency broadcast

? Unit's broadcast cutoff

Contact input, open voltage: 3.3 VDC, short-circuit current max. 1 mA

activation of inputs 1-3 x3

25-pin female D-sub connector:

? Activation of messages (when EV-200M is installed) x5

? Activation of power

? Activation and stop of emergency broadcast

? Unit's broadcast cutoff

Control output

Open collector output, withstand voltage: 30 V DC, operating current: under 10 mA

25-pin female D-sub connector:

? Irregularity of communications with the Remote Microphone

and an expansion amplifier

? AC power condition

? DC power condition

? Irregularity of the sound source of the Voice Announcement

Board

? Failure (FAULT) indication on

? Power switch on

Open collector output, withstand voltage: 30 V DC, operating current: under 10 mA

25-pin female D-sub connector:

? Irregularity of communications with the Remote Microphone

and an expansion amplifier

? AC power condition

? DC power condition

? Irregularity of the sound source of the Voice Announcement

Board

? Failure (FAULT) indication on

? Power switch on

Operating temperature

0 - 40 ?C

0 - 40 ?C

Finish

ABS resin, Steel plate, paint, dark grey

ABS resin, Steel plate, paint, dark grey

Dimensions (W x H x D)

419 x 143.3 x 355.7 mm

419 x 143.3 x 355.7 mm

Weight

12.5 kg

14.5 kg

Accessory (included)

Name label x1, VR cover x4, spare fuse, power cord

Name label x1, VR cover x4, spare fuse, power cord

Data Sheets

Brochure
Data Sheet