TOA BS-633AT Wall Mount Speaker (replaces BS-330T)

Manufacturer

£15.71 tax excl.

The BS-633AT is wall mount speaker made of ABS resin and can be hooked or mounted directly on the wall.

Add to Wishlist
Add to Wishlist

The BS-633AT is wall mount speaker made of ABS resin and can be hooked or mounted directly on the wall. The push-in type input terminal makes cable connections easy and allows bridge wiring. The input impedance can be easily changed by changing the tap position of the transformer from the rear side of the speaker.

The BS-633AT has a built-in attenuator and can be connected to a 2-wire and 3-wire systems.

Specifications

Rated Input6 W (100 V line), 3 W (70 V line)
Rated Impedance100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W)
Sensitivity91 dB (1 W, 1 m)
Frequency Response120 - 15,000 Hz (-20 dB)
Speaker Component12 cm (5") cone-type
Applicable Cable600 V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16)
ConnectionPush-in connector (bridging terminal)
Attenuation Level3 W: OFF, 1 (-12 dB), 2 (-6 dB), 3 (0 dB)
6 W: OFF, 1 (-13 dB), 2 (-7 dB), 3 (0 dB)
Operating Temperature-10℃ to +50℃ (14゜F to 122゜F)
FinishCase: ABS resin, off-white
Rear board: Hard board
Dimensions173 (W) × 195 (H) × 101 (D) mm (6.81" × 7.68" × 3.98")
(excluding volume control)
Wall Mounting DimensionsCase front mount: 184 mm (7.24")
Fixing hole mount: 120 mm (4.72")
Weight810 g (1.79 lb)
AccessorySpeaker mounting screw (4 × 35 (0.16" × 1.38")) … 2,
Speaker mounting screw (4 × 16 (0.16" × 0.63")) … 2