VX-2000 Series System

RK-8VX

Relay Board

Relay board for sub zones.

Link to manufacturer information

RM-200XF Fireman`s Microphone

A dedicated microphone for the VX-2000 system that fulfills the requirements of British and European standards:BS5839 part 8, EN60849 and IEC60849. The RM-200XF is designed to be exclusively used for emergency broadcast, however it can be used for general purpose broadcast applications as well.


Link to manufacturer information

Remote Microphone Extension

The Extension unit allows additional 10 zones (per unit) to be added to the RM-200 range of mics.

For use with the VM and VX range of RM Microphones

Link to manufacturer information

Related products:

VP-200VX Power Amplifier Input Module

The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with theVP-2064, VP-2122, VP-2241 or VP-2421 power amplifier.

Link to manufacturer information

VP-200VX Power Amplifier Input Module with BGM Faclilty

The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with theVP-2064, VP-2122, VP-2241 or VP-2421 power amplifier.

Link to manufacturer information

VP-2064 Power Amplifier

VP-2064 (60 W-by-4 channels)
Power Amplifier uses the VP-200VX Power Amplifier Input Module per channel.
Options available to buy amplifier unit and modules seperate or we also
supply the VP-2064INCL which includes 4 x VP-200VX modules fitted.

Link to manufacturer information

VP-2122 Power Amplifier

VP-2122 (120 W-by-2 channels)
Power Amplifier uses the VP-200VX Power Amplifier Input Module per channel.
Options available to buy amplifier unit and modules seperate or we also
supply the VP-2122INCL which includes 2 x VP-200VX modules fitted.

Link to manufacturer information

VP-2241 Power Amplifier

VP-2241 (240 W-by-1 channels)
Power Amplifier uses the VP-200VX Power Amplifier Input Module per channel.
Options available to buy amplifier unit and modules seperate or we also
supply the VP-2241INCL which includes 1 x VP-200VX modules fitted.

Link to manufacturer information

VP-2421 Power Amplifier

VP-2421 (420 W-by-1 channels)
Power Amplifier uses the VP-200VX Power Amplifier Input Module per channel.
Options available to buy amplifier unit and modules seperate or we also
supply the VP-2421INCL which includes 1 x VP-200VX modules fitted.

Link to manufacturer information

VX-2000 System Manager

The VX-2000 System Manager has been designed and built to meet British and European standards:BS5839 part 8, EN60849 and IEC60849. The VX-2000 is an input matrix unit that assigns input signals to 4 audio buses, and functions as the VX-2000 system's main controller.
A total of up to 8 units of the VX-200XI, VX-200XR, and 900 Series input modules can be mounted in a System Manager.
The VX-2000 can control audio signal routing, priorities, and peripheral equipment, while input and output control settings are performed by way of a PC.
Up to 2,000 system events and failures can also be recorded, and the log can be viewed from a PC.

Link to manufacturer information

VX-2000DS Emergency Power Supply Unit

Emergency Power Supply Unit The VX-2000DS Emergency Power Supply Unit supplies the DC power to each equipment in the VX-2000 system by connecting the VX-2000PS Power Supply Unit. It keeps the battery unit that contains 2 × 12 V sealed lead batteries charged compensating for the temperature of the battery charging voltage. When the DC power supply from the VX-2000PS stops, the VX-2000DS is automatically switched to the backup battery.

Link to manufacturer information

VX-2000PF Power Supply Frame

The VX-2000PF permits the VX-2000PS Power Supply Unit to be mounted in an equipment rack. Up to three VX-200PS units can be installed in the unit.

Link to manufacturer information

VX-2000SF Surveillance Frame

The VX-2000SF Surveillance Frame is the output matrix section of the VX-2000 system that assigns audio signals to individual zones from 4 audio buses. It can be extended to up to 5 units.
A total of 10 units of output modules and control modules can be installed per VX-2000SF.
4 types of modules can be used:
the VX-200SP Pilot Tone Detection module.
the VX-200SZ Impedance Detection module.
the VX-200SI Control Input module.
the VX-200SO Control Output module.

Link to manufacturer information

VX-200PS Power Supply Unit

The VX-200PS Power Supply Unit is mounted in the VX-2000PF Power Supply Frame when in use. There are 2 DC output channels per unit. Use the VX-200PS in the number suited to the required total system power.
Link to manufacturer information

VX-200SE Equaliser Card

The VX-200SE Equaliser is a 9-band, 1-channel equaliser to be mounted on the circuit board of the VX-200SP Pilot Tone Detection module or VX-200SZ Impedance Detection module.
Link to manufacturer information

VX-200SI Control Input Module

TOA's VX-200SI Control Input Module is used to increase the number of control inputs to be used in the VX-2000 system. It features 16 control inputs and is mounted in the VX-2000SF Surveillance Frame.

Link to manufacturer information

VX-200SO Control Output Module

TOA's VX-200SO Control Output Module is used to increase the number of control outputs to be used in the VX-2000 system. It features 16 control outputs and is mounted in the VX-2000SF Surveillance Frame.

Link to manufacturer information

VX-200SP Pilot Tone Detection Module

The VX-200SP is an audio signal output module of the VX-2000 system with speaker line pilot tone detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by monitoring for the presence of a pilot signal, and ground fault.

Link to manufacturer information

VX-200SP-2 Pilot Tone Detection Module

The VX-200SP-2 is an audio signal output module of the
VX-2000 system with speaker line pilot tone detection.

This module is to be mounted in the VX-2000SF Surveillance Frame
and detects speaker line short circuits, open circuits by monitoring
for the presence of a pilot signal, and ground fault. Connecting the
supplied line to the end of the speaker line eliminates the necessity
of using the speaker line for line monitoring. However, the shielded
cable must be used for the speaker line.

Link to manufacturer information

VX-200SZ Audio Signal Output Module

The VX-200SZ is an audio signal output module of the VX-2000 system with speaker line impedance detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by comparing inpedance readings, and ground fault.

Link to manufacturer information

VX-200SZ-2 Dual Impedance Detection Module

The VX-200SZ-2 is an audio signal output module of the
VX-2000 system with speaker line impedance detection.

This module is to be mounted in the VX-2000SF Surveillance
Frame and detects speaker line short circuits, open circuits by
comparing impedance readings, and ground fault.
Since the mosule is equipped with 2 speaker outputs (A and B),
broadcasts can be maintained even if one of the two outputs fails.
Failures are indicated by the LED on the panel.

Link to manufacturer information

VX-200XI Audio Input Module

The VX-200XI module is designed to be used in conjunction with the VX-2000 System Manager, and comes with control input terminals, low-cut and high-cut filters, and gain controls.

Link to manufacturer information

VX-200XR Remote Microphone Input Module

The VX-200XR module is designed to be used with the RM-200X Remote microphone or RM-200XF Fireman's Microphone. Insert this module into the VX-2000's input module slot for each Remote or Fire Microphone(s) used in the system.

Link to manufacturer information