Online Catalogue | List by Manufacturer | TOA | Music Loudspeakers
Quantity:
The speaker's smoothly curved surface permits it to blend in with virtually all modern buildings. A built-in matching transformer permits the speaker to be used for both high-impedance and low-impedance (8ohm) applications. The impedance can be easily changed from outside the speaker. A splash-proof design enables the BS-1030 to even be installed outdoors, in a location not directly exposed to the elements, such as under eaves. Mountable to wall surfaces directly or using with supplied or optional mounting brackets. Link to manufacturer informationRelated products:
Innovative design based on the golden ratio (1: 1.618)Unparalleled ease and simplicity of installationBrand-new slim bodyRated Input : 10W(100V line) Impedance : 100V line...1k ohm(10W), 2k ohms(5W), 3.3k ohms(3W), 10k ohms(1W)Frequency Response : 120 - 20,000 Hz Sound Pressure Level : 90 dBDimensions : 210(W) x 330(H) x 80(D)mm Input Terminal : M4 screw terminal Speaker Component : 5" (12cm) cone-type + balanced dome tweeter Finish Enclosure : HIPS resin, off-whiteGrille : Steel plate net, off-white, paint Link to manufacturer information
Thin type wall mount speaker with 5" cone speaker unitTwo-way speaker system employing a balanced dome tweeter and elliptical horn for high-frequency sound reproduction in combination with a 5" cone speaker unit ensures high-quality sound. The speaker's smoothly curved surface in combination with its straight lines permits it to blend in with virtually all modern buildings.Equipped with a speaker receptacle, providing speaker cable connection and installation ease.Equipped with a lock mechanism, preventing the speaker from being detached easily after installation.In-wall wiring, exposed wiring, or bridge wiring available for speaker cable connectionThe input power (impedance) can be easily changed by the rear-mounted rotary switch. Link to manufacturer information
Sealed type 3.9" (10cm) cone speaker system. 15W continuous program power capacity. Acoustically efficient compound resin enclosure. Attractive tetrahedron design for wall mounting or room corner installation with no extra brackets. Three visual-effect LEDs. Link to manufacturer information
Ceiling-mount speaker unit used with associated equalizing controller (wall-mount installation also possible). 12cm full-range unit with bass-reflex enclosure. The speaker panel diffuser provides a wide coverage area even for the high-frequency sound spectrum, ensuring excellent total audio response. The F-121C low-impedance (812) speaker system is rated at 120W continuous program input. Link to manufacturers information
F-1000 full range wide dispersion speakerThe latest addition to TOA's acclaimed speaker line, the new F-1000 Series of compact,high efficiency two-way speakers achieve higher performance levels for wide range frequency response and power handling.Designed to be extremely versatile in order to meet different installation and application requirements, the new F-1000 Series are ideal solutions that solve increasing needs for adaptable sound reinforcement. Link to manufacturer informationRelated products:
F-2000 full range wide dispersion speakerThe latest addition to TOA's acclaimed speaker line, the new F-2000 Series of compact,high efficiency two-way speakers achieve higher performance levels for wide range frequency response and power handling.Designed to be extremely versatile in order to meet different installation and application requirements, the new F-2000 Series are ideal solutions that solve increasingneeds for adaptable sound reinforcement. Link to manufacturer informationRelated products:
Ultra-compact – only 4.2”(106 mm) deep! 4” full-range driver Wide-dispersion: 160º conical (1-4k Hz avg.) Frequency Response: 65 to 18k Hz Sensitivity: 88 dB SPL (1 W, 1 m) Continuous Power Handling: 18 W Built-in 25/70.7/100 V transformer (6 W max.) with 8/16 ohm direct modes Convenient power tap selector on front baffle Four pole push-terminal input connector Low-profile, paintable grille Dust cover to protect components Link to manufacturer information
Ported bass-reflex design 5” full-range driver Frequency Response: 70 to 20k Hz Wide-dispersion: 170º conical (1-4k Hz avg.) Sensitivity: 90 dB SPL (1 W, 1 m) Continuous Power Handling: 120 W (8 ohms) Built-in 25/70.7/100 V transformer (30 W max.) with 8/16 ohm direct modes Convenient power tap selector on front baffle Metal back-can and safety cable UL Compliant for Air-Handling Spaces (UL2043) Removable terminal block with loop-through terminations Low-profile, paintable grille Overload protection circuitry Mounting C-ring included Link to manufacturer information
Special diffuser provides wide off-axis high frequency response Ported bass-reflex design Co-axial: 5” cone driver and dome tweeter Wide-dispersion: 170º conical (1-4k Hz avg.) Frequency Response: 70 to 20k Hz Sensitivity: 90 dB SPL (1 W, 1 m) Continuous Power Handling: 120 W (8 ohms) Built-in 25/70.7/100 V transformer (30 W max.) with 8/16 ohm direct modes Convenient power tap selector on front baffle Metal back-can and safety cable Removable terminal block with loop-through terminations Low-profile, paintable grille Overload protection circuitry Mounting C-ring included Link to manufacturer information
Special diffuser provides wide off-axis high frequency response Co-axial: 5” cone driver and dome tweeter Wide-dispersion: 155º conical (1-4k Hz avg.) Frequency Response: 80 to 20k Hz Sensitivity: 89 dB SPL (1 W, 1 m) Continuous Power Handling: 18 W (8 ohms) Built-in 25/70.7/100 V transformer (6 W max.) with 8/16 ohm direct modes Convenient power tap selector on front baffle Four pole push-terminal input connector Low-profile, paintable grille Dust cover to protect components Link to manufacturer information
Ideal for high ceiling applications Special diffuser provides wide off-axis high frequency response Ported bass-reflex design Co-axial: 6.5” cone driver and dome tweeter Wide-dispersion: 120º conical (1-4k Hz avg.) Frequency Response: 60 to 20k Hz Sensitivity: 91 dB SPL (1 W, 1 m) Continuous Power Handling: 180 W (8 ohms) Built-in 25/70.7/100 V transformer (30 W max.) with 8/16 ohm modes Convenient power tap selector on front baffle Metal back-can and safety cable Removable terminal block with loop-through terminations Low-profile, paintable grille Overload protection circuitry Mounting C-ring included
F-505GF-505W Two-way Speaker System Two-way speaker system with 8" woofer and HF compression driver. Uniform directivity horn with controlled dispersion coverage pattern (60° x 40°). Low-foam polypropylene enclosure in white (W) or dark gray (G). Built-in overload protection circuitry. Input panel with push terminals and 1/4" phone jacks internally connected in parallel. Easy installation using optional mounting brackets. Link to manufacturer informationRelated products:
FB-10 Subwoofer Speaker SystemPort radiation enclosure. 16cm (6.3") cone speaker. 60W (40Hz - 20kHz)/20W (40Hz - 100Hz) pink noise. Freestanding floor unit with decorator touch. Link to manufacturer information
Subwoofer for HX-5 Series SystemsSubwoofer module for augmenting low frequency response.Related products:
The rotatable cylinder enclosure with smooth curved surface blends in with modern building interior. Powerful sound reproduction with the woofer (8 x 5cm) using a magnetic (neodymium) circuit. Transient response of clear high frequencies ensured by the 1" balanced dome tweeter with ferro-fluid. Built-in crossover network circuitry suppresses unwanted signals and realizes uniform energy radiation. Optimized for quick and simple installation. Adjustable mounting angle of ±45°. Built-in transformer for both high and low impedance applications. Detachable screw terminals for quick connection/disconnection and Dual positive/ negative terminals for bridge connections. Fire resistant ABS (UL Standard 94: V-0 Grade) enclosure Specially selected external parts for easy refinishing and repainting, matching interior color and design. Link to manufacturer information
Powerful sound reproduction with the woofer (10cm) using a magnetic (neodymium) circuit. Transient response of clear high frequenciesensured by the 1" balanced dome tweeter with ferro-fluid. Built-in crossover network circuitry suppresses unwanted signals and realizes uniform energy radiation. Optimized for quick and simple installation. The speaker's round mounting base allows installation at any mounting angle. Built-in transformer for both high and low impedance applications. Detachable screw terminals for quick connection/disconnection and Dual positive/negative terminals for bridge connections. Fire resistant ABS (UL Standard 94: V-0 Grade) enclosure Specially selected external parts for easy refinishing and repainting, matching interior color and design. Link to manufacturer information.
Powerful sound reproduction with the woofer (10cm) using a magnetic (neodymium) circuit. Transient response of clear high frequenciesensured by the 1" balanced dome tweeter with ferro-fluid. Built-in crossover network circuitry suppresses unwanted signals and realizes uniform energy radiation. Optimized for quick and simple installation. The speaker's round mounting base allows installation at any mounting angle. Built-in transformer for both high and low impedance applications. Detachable screw terminals for quick connection/disconnection and Dual positive/negative terminals for bridge connections. Fire resistant ABS (UL Standard 94: V-0 Grade) enclosure Specially selected external parts for easy refinishing and repainting, matching interior color and design. Optimised for outdoor applications. Link to manufacturer information.
Attractive and compact design permits bracketless direct wall standard gang-boxinstallation at above head-height. Controlled 180° coverage pattern eliminates between-speaker audio dead spaces. Powerful TOA-designed neodymium magnet cone driver, plus tweeter. Built-in steep-slope crossover circuitry ensures smooth dispersion pattern and audio response. Transformer included to allow both high- and low-impedance operation. Paintable grilles enhance interior decor. Fire resistant ABS (UL Standard 94: V-0 Grade) enclosure Link to manufacturer information
Attractive and compact design permits bracketless direct wall standard gang-box installation at above head-height. Controlled 180° coverage pattern eliminates between-speaker audio dead spaces. Powerful TOA-designed neodymium magnet cone driver, plus tweeter. Built-in steep-slope crossover circuitry ensures smooth dispersion pattern and audio response. Transformer included to allow both high- and low-impedance operation. Paintable grilles enhance interior decor. Fire resistant ABS (UL Standard 94: V-0 Grade) enclosure Weatherproof. Link to manufacturer information
THE TOA HB-1 FLUSH-MOUNT SUBWOOFER is the ideal solution for adding low frequency enhancement to commercial, residential and retail sound systems. The HB-1's unique minimum-depth design allows discreet flush-mount installation in ceiling structures or in walls between studs spaced on 16" centers. The HB-1 features a tuned, ported enclosure and a heavy-duty 8" woofer for high power handling and extended low frequency response. An acoustic bandpass filter design eliminates the need for an external crossover. The solidly constructed steel enclosure also acts as a heat-sink to dissipate excessive heat from the speaker component. Other features include a paintable grille and removable terminal block. Options include a matching transformer for connecting the HB-1 to distributed speaker systems and a 900 Series Low Pass Filter Module for convenient system equalization. Link to manufacturer information
Variable Dispersion Speaker System. Four speaker modules ensure high power and high quality. The changeable orientation of each of the four speaker modules independently allows the directivity angle of the speaker system to be adjusted. Built-in passive network ensures appropriate sound quality. deal for both permanent and temporary installations, including both vertical and horizontal positioning. Equipped with a convenient carrying handle. Can be mounted directly on a wall or suspended by wire, chain or shackle with no need to use optional brackets. Optional mounting brackets allow use in a wide variety of applications, including suspension, ceiling mounting, wall mounting, and speaker stand mounting. Mounting procedures are described in the instruction manuals enclosed with the mounting bracket or stand adapter. Link to manufacturer information
SL-122 Compact Integrated 2-Way Speaker System30cm (12") woofer. Constant directivity 90° horizontal x 40° vertical dispersion high-frequency horn with piezo driver. Extended 70Hz ~ 20kHz frequency response. 240W continuous program material power capacity. 95dB(1W/1m) pink noise (330 ~ 3,300Hz) sensitivity. Two 1/4" input phone jacks (in/bridge out) for multiple speaker hookups. Interlocking corners for stacking, plus bottom-mounted stand adaptor. Rigid sealed-type enclosure with punched metal grille, plus heavy-duty carrying strap. Link to manufacturer informationRelated products:
SL-122M Compact Integrated 2-Way Floor Monitor System30cm (12") woofer. Constant directivity 90° horizontal x 40° vertical dispersion high-frequency horn with piezo driver. Extended 70Hz ~ 20kHz frequency response. 240W continuous program material power capacity. 95dB (1W/1m) pink noise (330 ~ 3,300Hz) sensitivity. Two 1/4" input phone jacks (in/bridge out) for multiple speaker hookups. Rigid, sealed-type enclosure with punched metal grille, plus heavy-duty carrying strap. Link to manufacturer information
SL-152 Compact Integrated 2-Way Speaker System38cm (15") woofer. Constant directivity 90° horizontal x 40° vertical dispersion high-frequency horn with piezo driver. Extended 70Hz ~ 20kHz frequency response. 240W continuous program material power capacity. 98dB (1W/1m) pink noise (330 ~ 3,300Hz) sensitivity. Two 1/4" input phone jacks (in/bridge out) for multiple speaker hookups. Interlocking corners for stacking, plus bottom-mounted stand adaptor. Rigid, sealed-type enclosure with punched metal grille, plus heavy-duty carrying strap. Link to manufacturer informationRelated products:
SL-152M Compact Integrated 2-Way Floor Monitor System38cm (15") woofer. Constant directivity 90° horizontal x 40° vertical dispersion high-frequency horn with piezo driver. Extended 70Hz ~ 20kHz frequency response. 240W continuous program material power capacity. 98dB (1W/1m) pink noise (330 ~ 3,300Hz) sensitivity. Two 1/4" input phone jacks (in/bridge out) for multiple speaker hookups. Rigid, sealed-type enclosure with punched metal grille, plus heavy-duty carrying strap. Link to manufacturer information
SL-222 2-Way Twin Woofer Speaker SystemTwo 30cm (12") woofers. Constant directivity 90° horizontal x 40° vertical dispersion high-frequency horn with piezo driver. Uniform 50Hz ~ 20kHz frequency response. 240W continuous program material power capacity. 96dB (1W/1m) pink noise (330 ~ 3,300Hz) sensitivity. Two 1/4" input phone jacks (in/bridge out) for multiple speaker hookups. Rigid, sealed-type enclosure with punched metal grille, plus heavy-duty carrying strap. Link to manufacturer information
T-550 2-Way Coaxial Speaker SystemSealed type speaker with 60W continuous pink noise and 180W continuous program power handling capacity. Highly efficient operation at rated sound pressure level of 96dB (1W/1 m). Frequency response of 100Hz~20,000Hz and 2.5kHz passive network crossover frequency. Two-way coaxial unit with 25cm low-frequency cone speaker and high-frequency CD horn fitted with compression driver (60° horizontal x 60° vertical). 1.6mm thick punching net and coniferous plywood enclosure make the speaker especially well-suited for indoor sports facility applications. Black, semi-matte urethane-painted coniferous plywood enclosure and black, semi-matte acryl-painted steel plate grille. Speaker mounting brackets and speaker mounting bolts included. Link to manufacturer information
Bass-reflex type speaker with 120W continuous pink noise and 360W continuous program power handling capacity. Highly efficient operation at rated sound pressure level of 100dB (1W/1m). Frequency response of 80Hz~20,OOOHz and 1.2kHz passive network crossover frequency. Long-distance-coverage high-frequency CD horn fitted with compression driver (60° horizontal x 30° vertical) and short-distance-coverage high-frequency CD horn fitted with compression driver (90° horizontal x 40° vertical), plus two 25cm low-frequency cone speakers. 1.6mm thick punching net and coniferous plywood enclosure make the speaker especially well-suited for indoor sports facility applications. Black, semi-matte urethane-painted coniferous plywood enclosure and black, semi-matte acryl-painted steel plate grille. Speaker mounting brackets and speaker mounting bolts included Link to manufacturer information
Blaydon Communications Limited - Registered in England No 1051050
