Online Catalogue | List by Manufacturer | TOA | Accessories
Quantity:
The AD-246 is a compact switching AC adaptor.Input : 220-240 V AC, 50/60HzOutput : 24 V DC, 600mACurrent consumption at rated output : 210mAPlug Type : DC Power RC6705 Centre PositiveRelated products:
Flash Memory Card for EV-350R Digital Announcer.Related products:
Adaptor to allow standard Compact Flash card to be used with the EV-350RRelated products:
Replacement clip for TOA Lapel Radio MicrophonesApplicable to model WM-370 and WM-4310
HY-412 Wall/Ceiling Mounting BracketFor 280-ME-AV, RS-21m, SL-122 and SL-152Related products:
Wall-Mount Swivel Bracket for F-505/505WP SeriesRelated products:
Wall-Mount Swivel Bracket for F-605/605WP SeriesRelated products:
The HY-AH1 Anchor Hanging Bracket is designed to support ceiling suspendedspeakers from an anchor bolt in order to prevent thespeaker's full weight from being directly applied to the ceiling panel.It is used in conjunction with reinforcement hardware supplied withthe speaker.Related products:
The HY-BC1 Back Can is a metal case attached to flush-mountceiling speaker when mounted in exposed applications. The BackCan is hung from a ceiling suspension pipe.the speaker.Related products:
The HY-BH10B Board Hanger Bracket is used to mount an F-1000Series speaker to a temporarily installed partition board.The speaker can be installed in either a vertical or horizontalorientation. Link to manufacturer informationRelated products:
The HY-CL10B Cluster Bracket allows a total of 4 F-1000 Seriesspeaker systems to be suspended from a ceiling in a single multidirectionalcluster. Link to manufacturer informationRelated products:
The HY-CL20B Cluster Bracket is used for cluster ceilingsuspension of 4 F-2000 Series speakers. Link to manufacturer informationRelated products:
The HY-CM10B and HY-CM10W Ceiling Mount Brackets are usedto mount F-1000 Series speakers to a ceiling in a horizontalconfiguration.Note:To mount the speaker to the ceiling in a vertical orientation, usethe brackets supplied with the speaker. For more information, referto the instruction manual enclosed with the speaker. Link to manufacturer informationRelated products:
The HY-CM20B and HY-CM20W Ceiling Mount Brackets are usedto mount F-2000 Series speakers in a horizontal configuration.Note:To mount the speaker to the ceiling in a vertical orientation, usethe brackets supplied with the speaker. For more information, referto the instruction manual enclosed with the speaker. Link to manufacturer informationRelated products:
The HY-CN1B/W is used to join 2 x HX-5 Series speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-rangesound reproduction in locations where sound efficiency may be hampered by conditions like long reverberation time or a high level of background noise.This bracket is designed for indoor use.Related products:
The HY-CN1B/W-WP is used to join 2 x HX-5-WP Series speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-rangesound reproduction in locations where sound efficiency may be hampered by conditions like long reverberation time or a high level of background noise.This bracket is designed for outdoor use.Related products:
TOA HY-CW1 series speaker mounting bracket allows the HX-5 speaker system to be mounted to a ceiling.Related products:
TOA HY-CW1WP - Ceiling Mounting Bracket Designed Exclusively to Mount HX-5 Series Speaker System, For Outdoor Use, Speaker Can be Rotated 360° Horizontally or Vertically up to 82.5° when Suspended Horizontally, Rugged Construction. TOA HY-CW1WP speaker mounting bracket allows the HX-5B-WP and HX-5W-WP speaker system to be mounted to a ceiling and its angle to be adjusted both vertically and horizontally.Related products:
Optional Adapter Frame for H-1 speaker.Related products:
TOA HY-PF1 - Speaker Rigging Frame Used to Suspend HX-5 Speaker System From High Ceiling, For Indoor Use, Rugged and Durable Exterior for Years of Rock Solid Mounting, Easy to Install, Good Value for Money, TOA HY-PF1B speaker rigging frame is used to suspend the HX-5B speaker system from high ceilings. Related products:
TOA HY-PF1WP - Speaker Rigging Frame to Suspend HX-5 Speaker System From High Ceiling, For Outdoor Use, Rugged and Durable Exterior for Years of Rock Solid Mounting, Easy to Install, Good Value for Money, Available in White Color. TOA HY-PF1WP speaker rigging frame is used to suspend the HX-5B-WP and HX-5W-WP speaker system from high ceilings.Related products:
TOA HY-ST1 - Speaker Stand Adapter used Exclusively to Mount HX-5 Series Speaker System on a Speaker Stand, Radical Design, Easy to Install and Use, Rugged and Durable Exterior for Years of Rock Solid Mounting, Good Value for Money. The HY-ST1 speaker stand adapter allows the speaker system to be installed on a speaker stand having a mounting pipe diameter of 35 mm.Related products:
The HY-TB1 is channel bar to be used when supporting flushmountedceiling speakers by way of ceiling bars to prevent their fullweight from being directly applied to the ceiling panel duringinstallation. This channel bar is used in conjunction withreinforcement hardware supplied with the speaker. One complete setconsists of 2 HY-TB1 bars.Related products:
The HY-TR1 Trim Ring allows installation of flush-mounted ceilingspeakers in pre-existing ceiling panel holes which are over 200mmin diameter. The use of 2 Trim Rings allows the speaker to bemounted in holes from 240mm to 300mm in diameter.Related products:
TOA HY-WM1B - Speaker Mounting Bracket to Mount HX-5 Series Speaker System to Wall or Ceiling, Designed for Indoor use, Allows Speaker to be Tilted Downwards or Upwards to 20° Depending Whether Mounted on Wall or Ceiling.TOA HY-WM1B speaker mounting bracket allows the HX-5B speaker system to be mounted to a wall or ceiling and its angle to be adjusted vertically.Related products:
TOA HY-WM1WP - Speaker Mounting Bracket to Mount HX-5 Series Speaker System to Wall or Ceiling, Designed for Outdoor use, Allows Speaker to be Tilted Downwards or Upwards to 20° Depending Whether Mounted on Wall or Ceiling, White in Color. TOA HY-WM1WP speaker mounting bracket allows the HX-5B-WP and HX-5W-WP speaker system to be mounted to a wall or ceiling and its angle to be adjusted vertically.Related products:
TOA HY-WM2 - Wall-Ceiling Direct Mounting Bracket to Mount HX-5 Series Speakers, For Indoor Use, Offers the Advantage of Suppressing Interference Caused By Sound Reflecting From Wall or Ceiling, Rugged and Durable Exterior. TOA HY-WM2 speaker mounting bracket allow the HX-5 speaker system to be mounted closely to a wall or ceiling. This type of mounting offers the advantage of suppressing interference caused by sound reflecting from the wall or ceiling, resulting in better sound clarity.Related products:
TOA HY-WM2WP - Wall-Ceiling Direct Mounting Bracket to Mount HX-5 Series Speakers, For Outdoor Use, Offers the Advantage of Suppressing Interference Caused By Sound Reflecting From Wall or Ceiling, Rugged and Durable Exterior. TOA HY-WM2WP speaker mounting bracket allow the HX-5B-WP and HX-5W-WP speaker system to be mounted closely to a wall or ceiling. This type of mounting offers the advantage of suppressing interference caused by sound reflecting from the wall or ceiling, resulting in better sound clarity.Related products:
MB-15B Rack Mounting BracketBracket (x 2) with connector. For rack-mounting one WD-4800 unit
MB-15B-BK Mounting Bracket"Half Width" Rack Mounting Bracket. Includes half width blank panel to fill the gap left when rack mounting half width products.Suitable for C-VD6 , NX-100 and NX-100SRelated products:
MB-15B-J Mounting BracketMounting Bracket to mount two "Half Width" products side by side in a 19" rack. Includes one pair of metal "joining plates" to link two products together.Suitable for 2 x C-VD6 , NX-100 or NX-100SRelated products:
MB-25B Mounting BracketRack mount kit for A-1000, A-1700 and A-1800 series amplifiersRelated products:
MB-36 Mounting BracketRack mount kit for VM Series Amplifiers including VM-2120 and VM-2140
TOA MB-WT3 Rack-Mount Kit - Designed for Use WT-5800, WT-4800 ,WT-3800 Wireless Receiver, Single Unit Mounting. Also suitable for mounting EV-20R digital message unitThe MB-WT3 is dedicated Rack Mount Bracket Kit for mounting equipment with panel width of 210 mm into an EIA standard 19" equipment rack. The MB-WT3 is for single unit mounting.Related products:
TOA MB-WT4 Rack-Mount Kit - Designed for Use WITH 2 x WT-5800, 2 x WT-4800 , 2 x WT-3800 Wireless Receiver, Dual Unit Mounting. Also suitable for mounting 2 x EV-20R digital message unitThe MB-WT4 is dedicated Rack Mount Bracket Kit for mounting equipment with panel width of 210 mm into an EIA standard 19" equipment rack. The MB-WT4 is for dual unit mounting.Related products:
Provide aural / visual monitoring for multi-channel sound and program systems.Large, easy to read watt meter for precise visual adjustment of output levels. Built in 5" loudspeaker.Accurate monitoring for systems having up to 10 separate program channels or 10 amplifiers. Rack-mountable (3-unit size) Link to manufacturer information
Amplifier Control Unit for PM-660DAmplifier control unit for 5 pin DIN plug remote switch type paging microphone (PM-660D). Desktop or wall (standard bracket) mounting. Outputs remote control signals for main amplifier power ON / OFF, and for initiating all-call paging. Microphone volume control and talk ON indicator. Power supplied by locally avalailable AC adaptor. Link to manufacturer informationRelated products:
Amplifier Control Unit for PM-660D with SignalAmplifier control unit for 5 pin DIN plug remote switch type paging microphone (PM-660D). Desktop or wall (standard bracket) mounting. Outputs remote control signals for main amplifier power ON / OFF, and for initiating all-call paging. Microphone volume control and talk ON indicator. Activates selectable 4-tone, 2-tone and single tone chimes, plus gong, when paging remote microphone's talk switch is pressed. Power supplied by locally avalailable AC adaptor. Link to manufacturer informationRelated products:
These Speaker Mount Brackets are designed to mount horn speakers or wide range speakers to walls orpoles. Pole mounting of the speaker requires addition of the optional YS-60B Pole Band. Link to manufacturer informationRelated products:
TOA's SP-410 Speaker Mounting Bracket is designed tomount TOA's BS-1030 Series or other box speakers on awall or ceiling. It can be directly attached to a double-gangelectrical box. Link to manufacturer informationRelated products:
The SP-420 is a bracket designed to be exclusively usedfor mounting TOA's BS-1030W Universal Speaker in a wallor ceiling. The bracket's feature to pinch the panel permitsit to even be mounted in the plaster or plywood wall orceiling panel. It can be mounted in the panel that isapproximately 5 - 24 mm thick. Link to manufacturer informationRelated products:
The SR-EP4 is used to join multiple SR-S4L or SR-S4S speakers. One complete set consists of 2 brackets.Number of Speaker to be Jointed : Max. 3 (when using 2 sets of SR-EP4)Finish : Steel plate, white, paintDimensions : 140 (w) x 220 (h) x 2.3 (t) mmWeight 1.1 kg (including accessories) Link to manufacturer informationRelated products:
The SR-EP4WP is used to join multiple SR-S4LWP or SR-S4SWP speakers. One complete set consists of 2 brackets.Number of Speaker to be Jointed : Max. 3 (when using 2 sets of SR-EP4WP)Finish : Stainless steel (SUS304)Dimensions : 140 (w) x 220 (h) x 4 (t) mmWeight : 900 g Link to manufacturer informationRelated products:
The SR-FB4 is designed to be used exclusively to suspend theSR-S4L or SR-S4S Line Array Speaker.Select the appropriate suspension holes to adjust the speaker'sdownward angle.A total of up to three SR-S4L and/or SR-S4S can be joined withthe SR-FB4 bracket.Since the bracket is designed for indoor use, do not install itoutdoors. Link to manufacturer informationRelated products:
The SR-FS4 Floor Stand is designed exclusively for use with astack of 2 SR-S4L Line Array Speakers.Mounted on casters with lock, it can be easily moved.NoteTo link 2 SR-S4L speakers, an optional SR-EP4 Extension Plate isneeded. Link to manufacturer informationRelated products:
TOA SR-SA4 - Stand Adapter Designed To Mount SR-S4L or SR-S4S Speakers On ST-32 Speaker Stand, Radical Design, Easy to Install and Use, Rugged and Durable Exterior for Years of Rock Solid Mounting, Good Value for Money. TOA SR-SA4 stand adapter is designed to be used exclusively to mount the SR-S4L or SR-S4S Line Array speaker on the ST-32 Speaker Stand. Link to manufacturer informationRelated products:
TOA SR-TB4 - Wall Tilt Bracket Designed To Mount The SR-S4L or SR-S4S Line Array Speakers, Designed for Indoor Use, Easy to Install, Rugged and Durable Exterior, Good Value for Money. TOA SR-TB4 wall tilt bracket is ideal for indoor use. The SR-TB4 is designed to be used exclusively to mount the SR-S4L or SR-S4S Line Array Speaker on a wall. It allows the speaker orientation angle to be adjusted to 5° max. vertically and 20° max. horizontally. Link to manufacturer informationRelated products:
TOA SR-TB4WP - Wall Tilt Bracket Designed To Mount The SR-S4L or SR-S4S Line Array Speakers, Designed for Outdoor Use, Easy to Install, Rugged and Durable Exterior, Good Value for Money. TOA SR-TB4WP wall tilt bracket is ideal for outdoor use. The SR-TB4WP is designed to be used exclusively to mount the SR-S4L or SR-S4S Line Array Speaker on a wall. It allows the speaker orientation angle to be adjusted to 5° max. vertically and 20° max. horizontally. Link to manufacturer informationRelated products:
TOA SR-WB4 - Wall Mounting Bracket Used for SR-S4L Speaker-for Indoor Use, Mounting Brackets Permit the Speaker to be Installed in the Most Appropriate Position for Its Intended Use. TOA SR-WB4 wall mounting bracket is ideal to used with SR-S4L Speaker. Link to manufacturer informationRelated products:
TOA SR-WB4WP - Wall Mounting Bracket Used for SR-S4L Speaker-for Outdoor Use, Mounting Brackets Permit the Speaker to be Installed in the Most Appropriate Position for Its Intended Use. TOA SR-WB4WP wall mounting bracket is ideal for outdoor use. Link to manufacturer informationRelated products:
The TOA ST-16 loudspeaker stand is a stylish, lightweight aluminium stand.This stand is recommended by TOA for many of its products. Link to manufacturer information
TOA Heavy steel folding tripod speaker stand, wide footprint for larger speakers.Height 1.0-1.9m35mm poleBlack
TOA Heavy-duty folding-tripod microphone floor stand complete with boom arm.Stand height 101-172cmBoom extends to 69cm3/8"" threadBlack Link to manufacturer information
TOA Heavy-duty folding-tripod microphone floor stand.Stand height 91-162cm3/8"" threadBlack Link to manufacturer information
TOA High Quality Friction Microphone Stand
TOA ST-65 Desktop Microphone StandThe ST-65 is a high quality telescopic desk stand that can be freelyraised and lowered from 120mm to 175mm in height.The unit comes complete with a clip type microphone holder suitable formicrophone with a maximum body diameter of 35mm Link to manufacturer information
TOA ST-66 Desktop Microphone StandThe ST-66 is a high quality telescopic desk stand that can be freelyraised and lowered from 220mm to 347mm in height.The unit comes complete with a clip type microphone holder suitable formicrophone with a maximum body diameter of 35mm Link to manufacturer information
Top hat fitting to allow the F-505 and F-605 series loudspeakers to fit poles/stands.Related products:
TOA WB-RM200 Wall Mounting BracketThe WB-RM200 is to mount RM-200X, RM-200M and RM-210 on the wall. Link to manufacturer informationRelated products:
TOA WCB-12 and WCB-12W Wall mount loudspeaker bracketFor use with F-160 series loudspeakers.Also suitable for BS-1030, BS-1110 and BS-1120Related products:
