Blaydon Communications Limited, Factory Road, Blaydon,
Tyne and Wear, NE21 5RY (Registered in England No 1051050)

Tel: 0191 4144241 ~ Fax: 0191 4147978

Best Sellers

This high sensitivity version of the Volt Stick provides instant, noncontact checking for the presence of AC voltage down to 110v, without making any disconnections in cables, wall sockets, fuses,circuit breakers, junction boxes etc.

This 110v version is ideal for construction site temporary supplies and, of course, for use in mains testing in the USA.

The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.

Features:
• Locates breaks in cables
• Detects blown fuses inside plugs or fuse holders
• Distinguishes between live and neutral wires in both single and three-phase supplies
• Identifies voltage-carrying cables in junction boxes
• Identifies faulty in-line switches
• Locates defective in-series light bulbs

Specifications:

Model:
Voltage range:
Sensitivity:
Response Time:
Intrinsically Safe:
Power Requirements:
Relative Humidity:
Operating Temperature:
Overvoltage:
Dimensions:
Weight:

Volt Stick 110
90 ~ 400 AC
Indicator will illuminate at 4mm distance of a 2.5mm conductor carrying 110v
Immediate
No
2 x Standard AAA alkaline batteries (supplied)
80% @ 30°C, 50% @ 40°C
-20 ~ +50°C
CAT III 1000v AC
145(L) x 18(Ø) mm
35g (including batteries)

Mixers/Amps

Online Catalogue | List by Manufacturer | RCF | Mixers/Amps

RCF AM 6020 Mobile Amplifier

Quantity:

Price: £262.00 (Excluding VAT at 20%)

The AM 6020 is specially designed for use on vehicles such as cars, trucks, boats, etc. Its dimensions fit DIN standards for easy installation in the normal vehicle radio space and fittings. The AM 6020's 600 Hz siren is especially useful on boats in foggy conditions.

- 12 / 24 Vdc power supply.
- Two balanced microphone inputs on DIN and XLR connectors.
- Two unbalanced auxiliary inputs for external stereo sources.
- Circuit for automatic music attenuation for microphone announcements (can be switched off).
- Stereo/mono operation.
- Final stages completely protected against overloads and short circuits.

Link to manufacturer information

Related products:

1. RCF HD 3216 Horn Loudspeaker

2. RCF ST7300 Roof Bar Bracket

3. RCF MD 6000 Fist / Firemans Microphone

RCF DX4008 Digital Processor

Quantity:

Price: £1,818.00 (Excluding VAT at 20%)

The DX 4008 is a complete 4 input - 8 output digital loudspeaker management system designed for the touring or fixed sound installation markets. The absolute latest in available technology is utilized with 32-bit (40-bit extended) floating point processors and high performance 24-bit Analog Converters. Sampling rate can be set to 96 kHz. The high-bit DSP prevents noise and distortion induced by truncation errors of the commonly used 24-bit fixed-point devices. A complete set of parameters include I/O levels, delay, polarity, 6 bands of parametric EQ per channel, multiple crossover selections and full function limiters. Precise frequency control is achieved with its 1 Hz resolution.
Inputs and outputs can be routed in multiple configuration to meet any requirements. The DX 4008 can be controlled or configured in real time on the front panel or with the intuitive PC GUI accessed via the RS 232 interface. Software upgrade for CPU and DSP via PC keeps the device current with newly developed algorithms and functions once available. Multiple setup storage and system security complete this professional package.

Link to manufacturer information

RCF MX 1822 Professional Mixer

Quantity:

Price: £491.00 (Excluding VAT at 20%)

Practical layout, exceptional audio quality and high channel count make the 6U rack mount MX 1822 a versatile device particularly suitable in fixed installations.

- 14 balanced MIC/LINE XLR inputs.
- 2 stereo inputs at line level for music sources (can also be configured as MIC).
- 48 V PHANTOM power supply.
- Each input can be directed onto two Master outputs and two AUX outputs.
- LED indicator for SIGNAL presence on each input.
- VU-meter assignable to each input or to the main output.
- Semi-parametric 3-band equaliser on each MIC/LINE input.
- OUTPUTS: Master on XLR connectors, AUX on 6.3 mm jacks.
- INSERT connections available on each input.
- Recording OUTPUT / INPUT on RCA connectors.
- Headphones output with volume control.
- Dimensions: 6U 19” rack (all the connections are on the rear panel).
- Operation in AC 115/230V.

Link to manufacturer information

RCF RM 8080 SPA 8000 System Preamplifier

Quantity:

Price: £505.00 (Excluding VAT at 20%)

The RM 8080 receiver-mixer handles and connects all the components of the SPA 8000 system. Specifically, this unit supplies the control consoles and local receivers, controls pre-recorded message playback, transmits the acoustic pre-announcement signal, and connects the SPA 8000 system to the amplification system that handles the audio signals for microphone announcements and prerecorded messages.
To adapt the audio output of the RM 8080 to the input of the amplification equipment, the unit is equipped with an output level adjuster. The RM 8080 unit has a height of 1 rack unit, and it can be placed on a table or mounted in CR 2500 series rack enclosures using the AR 1051-N accessory.

Link to manufacturer information

Related products:

1. RCF BM 8001 Paging Console

2. RCF RU 8020 Zone Switching Unit

3. RCF AR 1051-N Rack Kit