Blaydon Communications Limited, Factory Road, Blaydon,
Tyne and Wear, NE21 5RY (Registered in England No 1051050)

Tel: 0191 4144241 ~ Fax: 0191 4147978

Best Sellers

The original and still the best, Volt Stick is an instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation.

The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.

The PRO230 features a unique ‘shielded’ forktip for highly selective and accurate testing for presence of AC voltage in specific cables or wires. Ideal for professional, close proximity testing and installation work.

Features:
• Unique forked tip (patented for) gives unsurpassed selectivity and reduces the risk of spurious indications
• Live cables can easily be detected in equipment cabinets, fuse boxes, etc
• Cables and connections can easily be checked in low voltage equipment too
• Extremely safe when measuring in junction boxes
• With the supplied field strength amplifier, anti-tamper, earthed outlets can be checked.
• Powerful red light in the tip to indicate voltage
• Fully insulated for safe use

Specifications:

Model:
Voltage range:
Sensitivity:
Response Time:
Intrinsically Safe:
Power Requirements:
Relative Humidity:
Operating Temperature:
Overvoltage:
Dimensions:
Weight:

Volt Stick PRO230
230v AC
Indicator will illuminate at 4mm distance of a 2.5mm conductor carrying 220v AC
Immediate
No
2 x Standard AAA alkaline batteries (supplied)
80% @ 30°C, 50% @ 40°C
-10 ~ +50°C
CAT III 1000v AC
145(L) x 18(Ø) mm
40g (including batteries)

Travelling North on the A1 :

North Bound Directions

1. Travelling North on A1 pass Metro Centre complex
2. Travelling North on A1 pass sliproad signposted Swalwell
3. Take next sliproad signposted Blaydon A695
4. At the roundabout go straight ahead
5. Pass filling station on left
6. Get into right hand lane
7. At the roundabout go straight ahead staying in right hand lane
8. Follow road and pass under Scotswood Bridge onto Chainbridge Road
9. Pass bus stop on left
10. Pass junction on left for 'Factory Shops'
11. Take the next sliproad do not go over the flyover
12. Continue ahead until you reach a 'T' junction
13. Turn left at the junction
14. Turn immediately right do not go over level crossing
15. You are now on Factory Road
16. Continue down Factory Road until you reach a fork in the road
17. We are the building situated in the fork

Travelling South on the A1 :

South Bound Directions

1. Travelling South on A1 pass turn off for A69 Hexham
2. Continue south ove Blaydon Bridge
3. Take next sliproad signposted Blaydon A695
4. At the roundabout go straight ahead
5. Pass filling station on left
6. Get into right hand lane
7. At the roundabout go straight ahead staying in right hand lane
8. Follow road and pass under Scotswood Bridge onto Chainbridge Road
9. Pass bus stop on left
10. Pass junction on left for 'Factory Shops'
11. Take the next sliproad do not go over the flyover
12. Continue ahead until you reach a 'T' junction
13. Turn left at the junction
14. Turn immediately right do not go over level crossing
15. You are now on Factory Road
16. Continue down Factory Road until you reach a fork in the road
17. We are the building situated in the fork