Online Catalogue | List by Manufacturer | Current Thinking
Quantity:
The Economy Counter Kit comprises: ET20 AFILS amplifier, ETTC telecoil, Mains Lead, Tie Clip microphone and loop present sticker. Covers a 1 to 2-metre sphere around the telecoil, best mounted on the front of the counter with the telecoil bent to an inverse L. Output current > 2.5ARelated products:
The basic kit comprises: ET30 AFILS amplifier, Mains Lead, Tie Clip microphone and loop present sticker. Covers a square room 5.5m per side (30m2) up to a rectangular room 5m x 10m (50m2). Output current > 3ARelated products:
The economy counter kit comprises: ET30 AFILS amplifier, ETTC Telecoil, Mains Lead, Tie Clip microphone and loop present sticker. Covers a 1 to 2-metre sphere around the telecoil, best mounted on the front of the counter with the telecoil bent to an inverse L. Output current > 3ARelated products:
The economy counter kit comprises: ET30 AFILS amplifier, Mains Lead, ETSL Scart Lead, 30m of loop cable, Tie Clip microphone and loop present sticker. Covers a square room 5.5m per side (30m2) up to a rectangular room 5m x 10m (50m2). Output current > 3ARelated products:
The full counter kit comprises: ET30 AFILS amplifier, ETTC Telecoil, ETDM Desk Microphone, Mains Lead, Tie Clip microphone and loop present sticker. Covers a 1 to 2-metre sphere around the telecoil, best mounted on the front of the counter with the telecoil bent to an inverse L. Output current > 3ARelated products:
This coil allows quick and easy fitting of the ET30 to desks and counters, supplied with 1m of twisted feed cable and self adhesive clips for mounting the coil. Only for use with the ET20 or ET30 range.Related products:
This desk microphone has a fixed neck and is designed to fit through desks from 10mm to 40 mm thick. Only for use with the ET20 and ET30 range.Related products:
This low cost microphone is supplied with a removable self adhesive clip to allow easy fixing to windows, televisions etc. Only for use with the ET20 and ET30 range.**IMAGE FOR DISPLAY PURPOSES ONLY, ACTUAL PRODUCT MAY DIFFER SLIGHTLY**Related products:
This lead will plug directly into the scart socket of a television or other device and give clear sound to the loop system. Only for use with the ET30.Related products:
This small PCB will allow you to interface between a 100v line loudspeaker cable into any line level source. The unit has a balanced output on screw terminals.
This plate is to be used to mount the ETHVPPCB into a standard signal gang UK back box.Related products:
A4 Poster to indicate existence of induction loop facility.**PLEASE NOTE IF THIS ITEM IS ORDERED AS A SINGLE ITEM A RECORDED DELIVERY CHARGE OF £1.50 WILL APPLY, PLEASE IGNORE ANY DELIVERY CHARGES THAT THE SYSTEM AUTOMATICALLY GENERATES.
18mm wide insulated copper foil for placing loops on floor below carpets. Ideal for low spillage designs, 1.8mmsup>2 CSA Equivalent
Heavy duty white polypropylene tape printed with the blue ear logo and do not cut caution text. Ideal for fixing the ETCF copper foil to the floor.50mm wide and supplied on 50m rolls.Related products:
The ETRX is a loop listening device allowing non hearing aid users to listen to the broadcast of the induction loop system. Ideal for testing of induction loop systems.Supplied with heaphones.
The ETFSM is designed to allow the accurate measurement of loop field strength within an area covered by an induction loop (AFILS) system.This is an essential piece of test equipment for all those involved in installation and commissioning of induction loop systems.
Blaydon Communications Limited - Registered in England No 1051050
